Scheda LCD 42" Q RPC3 Full HD MONITOR
| Screen size |
|---|
| 42" (106.6 cm) diagonal |
| Aspect ratio |
| 16:9 |
| Resolution |
| 1920 (H) x 1080 (V) pixels |
| Pixel pitch |
| 0.48 (H) x 0.48 (V) [mm] |
| Useful screen |
| 930,24 (H) x523,26 (V) [mm] |
| Brightness |
| 500 cd/m2 (typical) |
| Contrast Ratio |
| 4.000:1 (typical) |
| View angle |
| 176° in all directions |
| Colors |
| 16.7 Mil |
| Response Time |
| 6.5 mSec |
| Video |
|---|
| 1 x RCA [CVBS1, input only] 1 x RCA [CVBS2, input only] 1 x mini DIN 4 pin [Y/C, input only] 3 x RCA [YPbPr, input only] |
| PC |
| 1 x Dsub-15 HD [Analog RGB, input] 1 x DVI-D [Digital RGB, input] |
| Audio |
| 2 x RCA [CVBS1 stereo input] 2 x RCA [CVBS2 / S.Video stereo input] 2 x RCA [Component stereo input] 1 x jack 3.5 mm [PC stereo input] Power stereo output, speakers [cinch] |
| Control |
| 1 x Dsub-9 female [Input] |
|
HDMI
|
| 1 X HDMI [Audio e Video con HDCP, input only] |
| LOOP THROUGH UNIT (optional) |
| PC output (optional) |
| 1 x Dsub-15 HD [Analog RGB, output] 1 x DVI-D [Digital RGB, output |
| Control output (optional) |
| 1 x Dsub-9 female [output] |
| Video compatibility |
|---|
| PAL (BGH/D/I, M, N, 60), NTSC (M, 4.43), SECAM HDMI [supporting CEA-861B specs. HDCP 1.1] |
| DTV |
| 480i/p,576i/p,720p, 1080i / 50-60 Hz, 1080p / 60 H |
| Video signal level |
| CVBS: 1 Vpp / 75 Ohm - nominal (with AGC) Y/C: 1 Vpp / 75 Ohm - nominal (with AGC) Y,Pb,Pr, 1Vpp / 75 ohm nominal |
| PC compatibility |
| VGA ~ WUXGA (1920x1080), NATIVE (1366x768) Automatic frequency detection |
| PC signal level |
| RGB: 0.7 Vpp / 75 Ohm (RGB), TTL (HV) 1 x DVI-D [Digital RGB, input only] |
| Frequency range |
| Horizontal: 20 KHz - 82 KHz Vertical: 55 Hz - 90 Hz |
| Audio signal level |
| Audio Input: 0.15 to 1 V Audio Output: 2 x 7W (10% THD) |
| Speakers |
| Embedded splitter up to 5x5 with bezel compensation |
| Control Interfaces |
| RS-232 Serial Port Commands and controls are available from any of user's interfaces Remote Control are OSD assisted |
| LoopThrough Unit (optional) |
| RS-232 pass-through VGA pass-through All inputs converted to DVI and retransmitted |
| Video |
|---|
| Mode (4 selections + user) Brightness, Contrast, Color, Sharpness Colour temperature (5 selections + user) Still frame Source selection |
| Size Video |
| (16:9, 14:9, 4:3, Panoramic, Zoom1, Zoom2 |
| Size Graphics |
| (16:9, 1:1, 4:3 |
| Geometry |
| Self adjustment of picture dimension Free adjustment of picture position |
| Audio |
| Mode (4 selections + user) Volume, Balance Equalizer (5 bands) Stereo / Dual1 / Dual2 AutomaticVolumeControl |
| Others |
| Stand-by mode Status Indication Programmable OSD aspect Screensaver (blue screen, pixel shiftl , wiper, gray background) Fan automatic manage/cooling Resize/Shift Multi Screen Function (up to 5x5) Timer (time, wake-up, sleep) Display address selection DPMS Auto Input Search |
| O.S.D. language |
| D, E, F, GB, I, P |
| Dimensions |
|---|
| 1050 (W) x 523,2 (H) x 136 (D) |
| Weight |
| 33 Kg (without base) |
| Mains voltage |
| 115/230 VAC ± 15%, 50/60 Hz |
| Power consumption |
| 240 W |
| Operating conditions |
| Storage: -20°C to 65°C (max 85% RH not condensing) Working: 0°C to 50°C (max 85% RH not condensing) |
| Class protection |
| IP 30 |
| Accessories |
|---|
| Power cable Remote control with batteries User manual |
| Optional |
|---|
| Safety glass; light transmission > 90% antireflective glass 2 + 2 mm. + 0,38 mm. plastic film |
| Accessories |
| Power cable VGA cable Audio cable Remote control with batteries User manual |
| PC Notes |
|---|
| Support microATX - v1.1 spec. Mini ITX (contact factory for connector layout and height constraints) |
| Motherboard |
| 1 x 5.25" exposed 1 x 3.5" internal |
| Drive configuration |
| 1 x 5.25" exposed 1 x 3.5" interna |
| Controls |
| Power switch |
| Power supply |
| ATX 200W CE PFC P4 (optional |
| Mains voltage |
| 115/230 VAC ± 15%, 50/60 H |
